Sure-Fit® Horse Fence Accessories

Our Sure-Fit® accessories are designed to give you the maximum range of options when it comes to designing and installing your Centaur HTP® fencing system. All components are produced to the highest quality standards, assuring you the fence installation that will stand the test of time.

Sure-Fit® Safety Sleeve

Unique T-Slots convert a metal T-post into an HTP® post that is much safer and more attractive.

Safety Sleeve Cross Section Sure-Fit Safety Sleeves eliminate the need for insulators by completely covering the post with pre-cut notches for wire and slots for Hot-Site® and tape.

Made out of high density poly-ethylene, the Sure-Fit® Safety Sleeve is very durable and impact resistant to provide years of maintenance-free service. Use coated clips to attach wire. Available in white and black (NEW).

	Lag Corner Insulator
	The Lag Corner Insulator screws directly into wooden corner posts while holding the high-tension wire away from the post to prevent grounding of the electric current.

	Insulated Fencers Lasso
	Centaur's Insulated Fencers Lasso allows for simple installation of high-tensile electrical wire at termination posts. The lasso simply loops the posts, providing an insulated end point for electric wires. Available in white only.

	Sure-Fit® Coated Clips
	Safety-Sleeve Clips are used to attach fencing wires to the Sure-Fit® Safety Sleeves. They feature an insulated coating to prevent shorting of electrical wires. Available in white or black.

	End Strain Insulator
	Centaur's end-strain insulator is specially designed to deliver maximum insulation under extreme pressure from high-tensile wire and end terminations. Available in white only.

	T-Post Insulator
	Sure-Fit® T-Post insulators fasten securely to T-Posts with a wrap-around application. The insulator can be removed and re-attached and is designed with a large opening to work with any polymer coated wire. Available in white or black.

	Wood Post Insulator
	Sure-Fit® wood post insulators are specially designed with a large opening to work with any polymer coated wire. Available in white or black.

	Bracket Insulator
	A unique bracket type insulator designed to be used on pipe or woodpost. For use with Hot-Site® or any tapes up to 1-1/2" wide. Available in white or black.

	Undergate Cable
	Use to carry power from the energizer to fence or bury under gates. Specially designed polymer coating protects against voltage leakage in extreme conditions. Available in black only.

	Line-Tap Connector
	Slotted bolt type connector used to make electrical connections. Eliminates power losses from poor connections. One tap can be used to make multiple wire connections.

	Insultube
	Use for the alternative types of insulation on White Lightning® and wire. Available in white and black 100' rolls.

	Endsulator™ Hook
	Used to attach an in-line tensioner to any bullnose insulator. No tools needed.

	In-Line Tensioner
	Ratchet type strainers designed to take high tension of Centaur products. Used to tighten Spur®, PolyPlus®, PolyStrand®, White Lightning®, Hot-Site®. Tightening handle sold separately.

	Wire Links
	Securely splices wire together with a smooth safe splice. No special tools needed. Strip approximately 1" of polymer coating and insert bare wire into wire link. Use 12.5 gauge link for White Lightning® and PolyPlus® and 15 gauge link for Hot-Site®.

	Staples/Barbed
	Galvanized barbed staples eliminates rust staining. Available in 1-3/4" to be used with PolyPlus®.

	Barrel Tensioner
	Centaur's barrel tensioners constructed of heavy-duty steel make installation faster and easier. Available in one-way for short runs and two-way for long runs. Centaur's double barrel tensioner is patented. Single barrel tensioner tensioner is patent pending. Available in white, black or brown.

	Insulator Pad
	Used to insulate the barrel tensioners when used with Hot-Rail®. Each 6" x 4" pad can be cut to size during installation. Available in black.

	Diagonal Brace Plate
	Makes a secure connection between brace and post without notching. Allows for solid, long-lasting braces.

	Spur® Cover
	Covers in-line tensioners for installations of Spur® HTP® 4" rail. Available in white, black or brown.

	Spur® Bracket
	Special galvanized steel bracketing system works like "belt loops" allowing rails to remain taut and flexes to disperse impact. Available in white, black or brown.

	Crimp Fitting
	For fast and easy splicing of both 12.5 and 15 gauge wires.

	Centaur/Hot-Rail® Bracket
	The patented "belt-loop" bracketing system allows the rail to slip through, dispersing impact. Soecial brackets have a steel core for added strength and durability. The polymer coating acts as an insulator for Hot-Rail®. Available in white, black or brown.